Skip to main content

A brief history of the 'Metal Of The Future'! - Part 3



Welcome back! Here's the third post on the history of the wonder metal - Aluminium. Let's move on in our journey and check out the important milestones that shaped our history.

Read our first & second post in this series.

1939: The world’s first turbojet-powered aircraft, the German Heinkel He 178, took to air on the 27th of August, 1939. Powered by a centrifugal-flow engine prototyped by Hans Joachim Pabst von Ohain, Ernst Heinkel designed the aircraft to achieve flight speeds up to 380 miles per hour. Despite the successful flight demonstration, the Reich Air Ministry (RLM) rejected the aeroplane stating that its combat endurance was only 10 minutes which limited its usability as a military aircraft in a war situation.

German Heinkel He 178
1948: The production of Series I, the first model of Land Rover cars, started off in 1948. Designed with an aluminium body and a steel-box chassis, it was originally intended for farming and light industrial use. Aluminium reduced the weight of the vehicle, thereby increasing the car’s fuel efficiency and resistance to corrosion.

Land Rover
1957: 4th October 1957, marked a milestone event in the history of humankind when the Soviet Union successfully launched the world’s first artificial satellite the ‘Sputnik I’ into space. Built entirely with aluminium alloy, Sputnik was 58 cm in diameter, weighed 83.6 kg and took only 98 minutes to orbit the Earth. The launch of Sputnik ushered in the Space Age for it propelled USA and USSR into a space race and led to the creation of NASA.

Sputnik satellite
1967: This was the year that aerated drinks behemoths Coca-Cola and Pepsi started selling the beverages in aluminium cans. It revolutionized the soft-drinks industry for the cans could be recycled over and over again without loss in quality. In fact, today Coca Cola’s cans are made of 42% recycled aluminium and 56% new aluminium.

Coca-Cola aluminium cans
1969: A key player in the aluminium guzzling aviation industry and the company and consortium of European aerospace manufacturers, Airbus was founded on 18 December 1969 with a mission to rival Boeing, McDonnell Douglas and Lockheed. Headquartered in Toulouse, France, Airbus is now a leading commercial aircraft manufacturer and captures almost half of all commercial airliner orders in the 100-seat and above category.

Airbus plane
1970: The world’s first twin-aisle, wide-body and twin-deck passenger aircraft, Boeing 747, makes its maiden flight for Pan American on 21st Jan, from London to New York. It was a landmark achievement in the history of the global aviation industry. Created amidst reduction in airfares, a surge in air-passenger traffic and increasingly crowded skies, the Boeing 747, nicknamed ‘Jumbo Jet’ had ample room and can carry up to 660 passengers. The aircraft is one of the most recognizable aircrafts in the world due to its distinctive ‘hump’ in the upper deck near the nose. Did you know that a single Boeing 747 requires over 66 tonnes of aluminium?

The Boeing 747
1972: With its members engaged in producing bauxite, alumina, aluminium and consumer goods, the International Aluminium Institute (IAI) was founded in 1972. It is the primary institution for R&D and tech expertise in the global aluminium industry. The institute aims to increase awareness of the valuable properties of aluminium and thereby increase its market size, provide a global forum for aluminium producers to congregate on matters of common concern, and promote a green & sustainable environment around the metal.

Aluminium - The Metal if the Future
1978: Established above a hat shop in London’s Lombard Court in 1877, the London Metal Market and Exchange Company first traded in tin, copper and pig iron. Since its inception, the LME has moved offices four times, from Lombard Court to Whittington Avenue, then to Plantation House in Fenchurch Street, followed by Leadenhall Street, and finally its current home at the Finsbury Square. Primary aluminium futures started trading on LME in 1978, and high-grade contract aluminium in August 1987.

The London Metal Exchange
1994: The flagship A8 model of the German Audi was the world’s first mass-market car with a fully-aluminium chassis. In an industry obsessed with faster, powerful and more fuel-efficient cars, no other automaker has relentlessly pursued an aluminium body as much as the Audi.

Audi A8 full aluminium chassis
1998: With a significant amount of aluminium in its body, the first component of the International Space Station was launched in 1998. Approx. five times the size of Russian space station, Mir, the ISS weighs about a million pounds over a length of 357ft, end-to-end. It is powered by an acre of solar panels, a surface area that could cover the U.S. Senate Chamber three times over, and programmed with about 2.3 million lines of code.

The International Space Station
Whoa! That was quite a ride from the 1800s, rife with events and inventions that have changed the course of humankind’s progress. The history of aluminium is hardly a few centuries old, but if we consider the spheres of human subsistence, the degree of its ubiquity is staggering! There isn’t a field that hasn’t benefited from the wondrous properties of aluminium, and each day scientists are working towards unlocking more powerful dimensions of the metal. Do we see the future of humankind sustained on the backbone of aluminium? 

Well, let’s just say that so far we haven’t found a reason to say ‘NO’.
Labels:

Comments

  1. Junaid6 November 2019 at 13:34

    You never want to be looking anywhere but local for a roof repair gainesville georgia. I don’t know if they will charge you more, but like you said, they will know the regulations and building codes better. I have never thought about getting a warranty for the roof. I would see if you actually need a warranty because my house for instance is in the desert so we don’t get very violent storms like other places. (edited)

    ReplyDelete

Post a Comment

Most read articles

Aluminium in guitars – It's all music to our ears

Think of a guitar and the classic wooden version comes to mind. There are hundreds of types and they come in all shapes and sizes. Some passionate players even go for custom made guitars just to suit their movements and taste. The simple guitar is still evolving with newer uses of the instruments in concerts and other forms of music. The use of wood in the body and the neck of a guitar is not going to cease in a long time. However, the use of other selected materials by modern guitar manufacturers has significantly improved the sound quality and handling of the guitars. “Manufacturers were making custom guitars from solid billeted aluminum. I was still in graduate school and couldn’t afford such instruments. So I decided to make a competitively priced guitar. Instead of wood or plastic, I opted to use 0.080-in. aircraft-grade aluminum sheet metal because of its quality and durability,” says the then-future CEO of Normandy Guitars. Aluminium Guitar The use of Alumin
82 comments
Read more

Aluminium extrusions - The ultimate value addition of Aluminium downstream

From simple paper clips to complex pieces used in advanced technology, aluminium extrusions are created in various shapes and sizes for value added end use utilizations. The computer you are using right now contains at least one aluminium profile in the form of a heat sink. This takes advantage of aluminium’s excellent thermal conductivity, unique anodising capability and freedom of design to keep your computer’s processor cool. Different cross sections of extrusions Extrusion is a process used to create objects of a fixed cross-sectional profile. A special tool called a ‘die’ is used to create these extrusions by cutting or shaping the material with the help of a press. These dies are customized to create the wanted design. The process involves the pressing of a pre-heated solid cylinder of aluminium (billet) which is forced through the die opening. The billets are heated to a temperature range of 350 – 500 degrees Celsius. Aluminium does not glow when heated ye
35 comments
Read more

The choice is clear - Aluminium body for high end smartphones

A lot of phone companies are trying to build slim and sturdy phones for the ever growing market of steroid enhanced hardware capabilities. With phone manufacturers stuffing more RAM and precision cameras in the modern phones, the weight and robustness of the frames becomes all the more important. Today, some manufactures prefer a fiber body to reduce the overall weight in comparison to metal bodies. However, there’s something which still draws a larger advocacy of using aluminium bodies instead of a plastic or fiber. In 2007, Apple CEO Steve Jobs penned an open letter highlighting changes to the company's environmental policy in hopes of achieving "a greener Apple." In the letter, Jobs specifically noted the Mac maker's adoption of aircraft-grade aluminum in order to improve recycling uptake. Apart from the cost reduction implications, Apple is strongly in favor of aluminium usage in all its products for improving its year on year recycling capabilities with
19 comments
Read more

Humble Aluminium cans or sculpted masterpieces?

Have you ever spared a thought about what happens to the humble aluminium can after its purpose is done? Do we hear you say “they’re recycled and reused!?” Well, of course, you’re correct. But in its afterlife, some aluminium cans get converted into beautiful sculptures and serve a higher purpose. Behold these beautiful Aluminium masterpieces created by the Detroit-born artist Noah Deledda! Courtesy: 1 Fuzz Courtesy: My Modern Met Courtesy: WOSU Courtesy: The Inspiration   The interesting fact about these creative and exquisite pieces of sculptures is – Noah creates them with his bare fingers! "Through sculpture, I try to create something unique out of an ordinary object," says Noah, “My goal, and reason for ever making art is to raise awareness of the importance of the creative process. This drives me to create work that challenges perception and inspires curiosity.” To begin with, he removes the outer paint / commercial sticker
3 comments
Read more

Lamborghini's raging Super SUV URUS - a balance of power and weight

This is unlike any Lamborghini automobile ever! An SUV from the company who produces supercars made from the blood of raging bulls? Of course, they are calling it the world’s first Super Sports Utility Vehicle – a fact we can’t deny given the super specs on the automobile and Lamborghini’s signature design. Will this animal from Lamborghini’s bullpen deliver on the brand’s promise? Let’s find out! From the outside, the vehicle sports the signature of Lamborghini’s extreme design yet finds a way to make it less aggressive for the owners who just want to buy milk on a cold Monday morning from the nearest market. However, on the inside, it’s still a beast. The front hood houses the 4 litre V8 twin-turbo engine with 650 HP and 850 Nm of torque. Acceleration from 0-100 km/h is achieved in just 3.6 seconds and the top speed is a staggering 305 km/h! Braking is no less impressive: the Urus decelerates from 100 km/h to 0 in 33.7 meters. The vehicle is 4-wheel steering with carbon-c
2 comments
Read more